Badlands Bulldozer 30 cal 175 gr for testing in a 1:11 Sako

[Chandalar]

Have a Sako 75 in 300 RUM with a 1:11 twist, hoping to shoot Badlands Bulldozer 175's, need to test and see if they will stabilize in that barrel, if anyone has an extra 10 of these I would be happy to buy them from you, please message me if you do,

 

[FireFlyFishing]

Berger has a stability calc on their site.

 

[Chandalar]

Berger has a stability calc on their site.

Erik, I used that yesterday and think it would be best to see if the bullets push through paper at 100 and 400 without tumbling. Thanks

 

[can1010]

stick with the recommended 1-10 or faster. just going through the paper straight is not enough with all copper bullets no matter the manufacture. monos are a different beast compared to cup and core bullets, over stabilization is good for proper expansion and to continue to track straight after impact. Badlands makes a few options better suited for your twist, stick with those and avoid the disappointing performance people have had by unstabilized mono bullets and then blame the bullet manufacture.

 

[Chandalar]

stick with the recommended 1-10 or faster. just going through the paper straight is not enough with all copper bullets no matter the manufacture. monos are a different beast compared to cup and core bullets, over stabilization is good for proper expansion and to continue to track straight after impact. Badlands makes a few options better suited for your twist, stick with those and avoid the disappointing performance people have had by unstabilized mono bullets and then blame the bullet manufacture.

Thanks, will do!