7prc Starter Load

Anyone got a starting load for a 7prc with 175 Berger elite and H1000 or retumbo? Thanks
1714799756759.png
 
Published data
Hodgdon Reloading 24" barrel:
H1000 67.2 2968 Max load
Retumbo 70.0C 2985 Max load

Hornady App 24" barrel:
H1000 67.1 2950 Max load

My personal data 22" barrel:

H1000 67.6 2825 F215M
175 EH have been running 20-30 fps slower than 175 ELDX
F215M have been running 20-30 fps faster than CCI250s & F210M
175EH seem to like 0.040 jump in my rifle. 3.380 COAL

I haven't tried Retumbo yet. My rifle seems to like RL26 with loads backed off of maximum giving me the best groups and SD/ES.
 
Published data
Hodgdon Reloading 24" barrel:
H1000 67.2 2968 Max load
Retumbo 70.0C 2985 Max load

Hornady App 24" barrel:
H1000 67.1 2950 Max load

My personal data 22" barrel:

H1000 67.6 2825 F215M
175 EH have been running 20-30 fps slower than 175 ELDX
F215M have been running 20-30 fps faster than CCI250s & F210M
175EH seem to like 0.040 jump in my rifle. 3.380 COAL

I haven't tried Retumbo yet. My rifle seems to like RL26 with loads backed off of maximum giving me the best groups and SD/ES.
I just went down the 7 prc road again 🤦‍♂️
I have a 22" bbl and still in load development
Stage But I might of found the load i'm going to shoot as long as it holds together the second trip out. I'll find out tonight
Shooting 175 EH with RL 26 and 215m in adg brass seated 0.040 off I'm getting 2910 fps.
If it holds together tonight and repeats itself I'm gonna call it good.
Retumbo did not work very good. Large groups and right around 2900 fps.
 
I just went down the 7 prc road again 🤦‍♂️
I have a 22" bbl and still in load development
Stage But I might of found the load i'm going to shoot as long as it holds together the second trip out. I'll find out tonight
Shooting 175 EH with RL 26 and 215m in adg brass seated 0.040 off I'm getting 2910 fps.
If it holds together tonight and repeats itself I'm gonna call it good.
Retumbo did not work very good. Large groups and right around 2900 fps.
I'm driving down it right now, just started trying some Apex Afterburners. I've had worse starts. Thats a fouler plus 4, .5 gr increments.IMG_8857.jpeg100yards
 
Last edited:
I'm fooling around with a 7PRC with a 26" Bartlein Carbon bbl. It's been a bit finicky so far but I'm hoping that it was either the scope or bedding that wasn't just right.

Yesterday I tested a few new loads with different powders and bullets. I shot a single group with the 180 Berger Hy and 68.0 H1000. Velocity was 2,926 fps with an SD of 5.4. The group came in at 1.40" at 418yds.
If that can be repeated - I'm done. LOL
 
Did you end up with LR or LRM primers?
With H1000 and N565 with 180HT I can tell no difference, in pressure, velocity or accuracy.

If your group size doubles you are still done, or about .1 gr from it.
☑️ 👍
 
Top