6 Dasher Brass

[Coyote Shadow Tracker]

We are putting components together for a 6mm Dasher - primarily to build a rifle for customers and want to have component for them to use for reloading.
We basically always use Lapua, but Lapua doesn't make 6mm Dasher. I know that you can fire form 6br to 6Dasher.
How is Peterson Brass???

Thanks
Len & Jill

 

[wasskeet]

IMHO, Peterson is very good. I started out with it, then had everyone tell me that you need to fire form Lapua to have decent brass. I'm sticking with Peterson. Disclaimer: I am shooting it in a no neck turn chamber (.275").

 

[loonie]

Alpha also makes Dasher brass. In stock at blue collar now.

 

[Hydra6]

What is your reamer designed for - Lapua or Alpha? 6 Dasher, 6BRA, 6XC and others become painful if the chamber reamer and brass do not play well together.

 

[Coyote Shadow Tracker]

What is your reamer designed for - Lapua or Alpha? 6 Dasher, 6BRA, 6XC and others become painful if the chamber reamer and brass do not play well together.

From the original owner first reamer cut:
"This new Reamer we got for the 6 Dasher is .272 neck
.104 freebor and the original barrel shot 32.2 gr of varget.
Berger 105 hybrid .015 off the lands.
CCI 450 primers.
It was right around 2970 fps and shot 1/4 moa at 300 yards very consistently."