Proof carbon 9 twist
30 Nosler 2023
- Thread starter 7mm man
- Start date
Help Support Long Range Hunting Forum
sierracharlie338
Well-Known Member
Same in the sendero contour not the lite
Couesnguns
Well-Known Member
I have a #3 bartlein barrel on a kelby action for my 30 Nosler. I throated it for the 245s at 3.75 but for break in, I just threw some retumbo and 215s together and got sweet load without really trying. I haven't even played with the 245s since it shoots the 215s so good but now that the weather is cooling, I am going to try them out.
snox801
Well-Known Member
I looked at one but ended up with the 30 Sherman. 214gr hammers at 3160fps works great. Although the I see the draw to the nosler
Can you easily get brass for the 30 sherman?
I knew I shouldn't have opened this thread, now I want one! What reamer are you guys using? My understanding is that the SAAMI freebore is suboptimal. thanks
H
H
I'm using one I had made by JGS with a 0.200" freebore. Perfect for the 215-230 range. A little short for 245's but it works well with them also as you can see from my velocity. If I was strictly shooting 245's I'd go with a freebore of 0.230". 215's at 3,130 or so and 245's at 2,962.
Awesome!! Thanks.
Predator 22
Well-Known Member
Mine is almost identical to longtine's except I went .344 neck.
Is that to have a really tight chamber? Do you need to turn neck?
Predator 22
Well-Known Member
No turn neck. It will just help keep the cartridge alignment and not over work the brass.
Awesome!! Thanks
What is your COAL for your load? Is it over the standard long action length?
Just purchased a REM 700 pre-fit barrel in 30 Nosler. You guys sold me. Got it 130 bucks off at Carbon Six. Got sendaro profile, 24", 5/8" threads for muzzle brake. No custom throat, but .720 counter bore for m16 extractor. I normally run mack brothers bolts. They are sweet.
