270 Quickload Data Needed

Do you have a fired case capacity in water? It will change results a good bit if your fired case capacity is different from the default in quickload.
 
Can someone please run Quickload data for 270 Win, 22" barrel, 140gr Nosler Partition, RL26, COAL=3.320", Primer Fed 210 and 215? Thank you.
What is the case H2O capacity. Can't run a load without that info. 1st thing to put into QL for any load. Also primer data is not listed in QL. That is why you start 10% under max load.
 
Can someone please run Quickload data for 270 Win, 22" barrel, 140gr Nosler Partition, RL26, COAL=3.320", Primer Fed 210 and 215? Thank you.
You could download the GRT. It is awesome and you could inputs including H2O, COAL, etc, and see the numbers. I have been using them and it works very well. The software is free!

 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top