264 win mag H1000 140 ELDM load data wanted

[Majestic 6.5]

I am getting ready to begin load development on a 264 win mag. It has 26 inch hart barrel, 8 twist. I am looking to load the Hornady 140 ELDM, H1000 and a CCI 250. I have seen the data put out by Hornady but would love to see any loads you all have found to be successful. I wouldn't mind seeing some H1000 and 140 vld data as well. I fully understand the start low and work up MO but would like to see where you guys are ending up. Thanks

I am very interested in your findings. I'm looking to get Speer Gold Dot 140 gr with H1000 out of my 1:9 twist 3000 fps reloaded. My rifle is a 6lb. rifle with a 22 inch sporter barrel so a High BC .571, rebated BT VLD style bonded bullet doesn't need to be traveling above 3000 for me. Recoil is not my friend. I've had it loaded before but was at various seating depths and no info from the Reloader. I also tested it for high velocity impacts and was extremely pleased with penitration and weight retention. Bullets OAL 3.300 shot the best.

 

[Majestic 6.5]

My 34yr old 264 Win Mag Model 70 sporter hit 3,000fps @64gr with the 143eldx, H1000, and Nosler Brass. I saw pressure signs (cratered primers) @64.8 3,033. I rolled back to 64.4 3017fps and .010 off the lands. 66.2 gr of Mag Pro matched my H1000 results when I couldn't find H1000.

My .264 WM 1:9 twist has a 22" barrel 6lb sporter rifle and I also am looking for a load using H1000 traveling no more or less than 3000 fps. I'm not a Reloader but if you have any info on barrel length, twist and gr you could recommend it would be greatly appreciated? 64grs sounds like a good starting point for a 140gr VLD.