25-06 and 135gr Bergers

[thatguyshm]

After researching, theres a lot of talk with little to no load data available. Rifle is twisted properly, it's a plain 25-06. Brass is new nosler, only thing I could readily find. I have most primers other then remington and Winchester.

Powders I have are:
H1000, RL23,26,16,22,4000, Retumbo, win Supreme 780, H4350, 7828 plus other medium rate powders.

Thinking of trying RL26, starting around 46gr and going up looking for pressure. Any ideas, suggestions, prior experiences??

 

[just_jon]

I was playing around in quickload when I saw your post. I was able to run data for all powders except 4000 and assumed a 24" barrel. As always, start low and you assume all liability. If you need anything further, don't hesitate to ask.

 

[thatguyshm]

I'm thinking I will start at 53gr H1000 and use 57gr as a max, and will report back.

 

[340Wby-4-everything]

And so it begins............................25-06 and 257Wbys will soon be shooting 150grs

 

[jrkotz]

@thatguyshm How did your load development go?