20 inch 300 PRC

tgridley

Well-Known Member
Joined
Dec 31, 2012
Messages
194
Reaction score
57
City & State/Province
Lampasas Texas
After barrel break in I settled on 83.6 grains of H 1000, 185 grain Berger VLD Hunter, 3.625 COAL
Average velocity 3020 fps, ES 8, SD 3
New Lapua brass, AB Raptor Suppressor.
3 shots .092 group
Huskemaw 5x30 tactical scope
The suppressor looks long but it goes over the barrel 6 inches before it starts threading.
Bartlein Barrel
Terminus Action
Timney Hit Trigger set at 8oz
AG composite stock
 

Attachments

  • 300 PRC 2.jpeg
    300 PRC 2.jpeg
    83.1 KB
  • 300 PRC target.jpeg
    300 PRC target.jpeg
    48.2 KB
After barrel break in I settled on 83.6 grains of H 1000, 185 grain Berger VLD Hunter, 3.625 COAL
Average velocity 3020 fps, ES 8, SD 3
New Lapua brass, AB Raptor Suppressor.
3 shots .092 group
Huskemaw 5x30 tactical scope
The suppressor looks long but it goes over the barrel 6 inches before it starts threading.
Bartlein Barrel
Terminus Action
Timney Hit Trigger set at 8oz
AG composite stock

How do you like that Raptor?
 
After barrel break in I settled on 83.6 grains of H 1000, 185 grain Berger VLD Hunter, 3.625 COAL
Average velocity 3020 fps, ES 8, SD 3
New Lapua brass, AB Raptor Suppressor.
3 shots .092 group
Huskemaw 5x30 tactical scope
The suppressor looks long but it goes over the barrel 6 inches before it starts threading.
Bartlein Barrel
Terminus Action
Timney Hit Trigger set at 8oz
AG composite stock
Great build
Would love to see a report on the last few inches of your carbon barrel with repeated very high heat exposure. Something to watch
 
Will be something to watch, so far I really like the can. It is quieter than any of my other 6 cans.
Agree - not sure how you shoot but most carbon barrels rarely get above 250 degrees. Most Ti cans get regularly get above 500 degree and sometimes higher to nearly 800...not knowing what resin temp they spec for that barrel (some are around 400) could be a delam issue if you run it hard repeatedly.
 
I don't run them hard and usually 1 minute between shots. Also the can doesn't get very hot back there. Plenty hot up front.
 

Recent Posts

Back
Top