jcmckinney1
Well-Known Member
I looking for a good stock for my 7 Mag build. I have been looking at Manners and McMillan. Here is my issue. I have a high cheek bone so my eye rests lower than most people when I apply my cheek to the butt stock. Both Manners and McMillan have adjustable cheek rests but not sure of their reliability and if I really need one. Of the 2 manufacturers, what models would you recommend? Also, what bottom metal should I get?
Will be used mostly for hunting.
Action: Stiller Tac-300
Barrel: Obermeyer Remington Target: The Remington 40X target contour is manufactured with a taper of 0.012" per inch. It has an approximate diameter of 1.20" at the breech end of the taper and a diameter of 0.87" 28 inches from the breech end.
Been looking at:
Manners: MCS-TA, MCS-GAT, MCS-T3
McMillian: M40A-1 HTG
Will be used mostly for hunting.
Action: Stiller Tac-300
Barrel: Obermeyer Remington Target: The Remington 40X target contour is manufactured with a taper of 0.012" per inch. It has an approximate diameter of 1.20" at the breech end of the taper and a diameter of 0.87" 28 inches from the breech end.
Been looking at:
Manners: MCS-TA, MCS-GAT, MCS-T3
McMillian: M40A-1 HTG