Huntnful
Well-Known Member
Thank you! I've never seen a cold bore deviation in my groups with any benchmark or Bartlein that I've used.Just what you would expect from your cold bore shot. Beautiful gun! enjoy
Thank you! I've never seen a cold bore deviation in my groups with any benchmark or Bartlein that I've used.Just what you would expect from your cold bore shot. Beautiful gun! enjoy
lol oops!!!I wanted to test the single feed McGuires in my mag just because. It crushed all 3 tips with the first shot unfortunately. I had them loaded at max mag length so there wouldn't be any slop, but it still thumped them pretty good.
A quick BC test at 800 yards put them around .33-.34 G7
View attachment 519720
I thought about loading 1 before I loaded 3 actually. But I wanted to have the mag fully compressed like how it would be in the field and see what it did. Price I had to pay for no questions lol.lol oops!!!
Probably could have saved yourself 4 bucks and loaded 1.
I wonder if you seated them a little deeper so there was some room in the box…would that help?
Are the tips of your eldms getting smacked hard enough to get damaged/deformed?I thought about loading 1 before I loaded 3 actually. But I wanted to have the mag fully compressed like how it would be in the field and see what it did. Price I had to pay for no questions lol.
More room in the mag slaps them even harder in my experience. More inertia before it hits the tip. My 208's are .130 further from the mag wall and it smacks them plenty good lol
Yeah. They'll show just the slightest deformation of the tip. I can't see the difference at 1000 yards though. Because I load up a mag full to test them for that reason. Instead of single feeding them.Are the tips of your eldms getting smacked hard enough to get damaged/deformed?
For sure. An unknown munitions mag would give an extra .240 over the hawkins mags.Why i dont use mags
I've seen the same thing with Wyatt's boxes though.Why i dont use mags
A single feed would definitely be the way to go for legit long range killing and consistency. But I just can't personally talk myself into building a system dedicated to it. Even though up close, everything is normally getting smoked in 1 shot. And long range, you normally have ample time for everything.I've seen the same thing with Wyatt's boxes though.
As a rifle builder, every customer that comes in my shop seems to want a mag box. With these magnum calibers the cartridges take a beating.
The problems are endless..Closed tips on bergers, coal changes, neck tension changes, deformed tips on the Hornady plastic tipped bullets, etc.
I wish more people would try a single shot. The action is stiffer, has more support on the lower lug abutment, and has a lot more bedding surface.
I use these in my 30 SM and don't get tip damage. My OAL is 3.765". Might try one of those if you like how they shoot.For sure. An unknown munitions mag would give an extra .240 over the hawkins mags.
I have the AMP, just need a Henderson now.AMP annealer and Henderson trimmer sure make for some beautiful cases . Got 75 pieces twice fired now.
View attachment 521836
What pilot do you use, a regular 300 NM?AMP annealer and Henderson trimmer sure make for some beautiful cases . Got 75 pieces twice fired now.
View attachment 521836