Allen Mag Shooters Group

You wanna see something impressive Nyles, tomorrow when you shoot at 1K try to pay attention to the time of bullet flight from the shot to the target!!!! I have shot mine beside 22-250,243,6-250,280AI,308,and 338 Edge and the amount of time it takes for my bullets to thump the target compared to everyone elses still makes people say ***!!!!!!!!!!!!!! LOL

Your doin just fine with that new smoke pole of yours!!!!!

Nice talkin to ya again bud

take it easy
steve
 
Well well its 2008....I didnt make it to the range! Anywhere else for that matter, I was going to bed early really! I promised some firewood for a bonfire to a party invite so kinda least had to show up.....then someone had all this fried deer meat, hamburgers and then someone said "I needed a LIL Capt in me"! Then this stuff named Don Julio shows up........anyway so much for the range!
 
I once saw a post that had an overview of all the AM 's and what their parent case was how the were formed and what velocities were reached. Does anyone have a link to that post?
 
Allen Precision Shooting


ALLEN MAGNUM, ALLEN XPRESS AND ALLEN TACTICAL WILDCATS


2007


Listed below are the current members of the Allen Precision family of wildcat chamberings. Included you will find the name of the wildcat chambering, parent case used for the wildcat, preferred bullet for each specific wildcat chambering and average performance from listed barrel lengths. Also listed is intended use and appropriate loading powders for each.


Allen Magnum Wildcats


.224 Allen Magnum
270 WSM parent case, fireformed to sharper shoulder angle and less body taper
80 gr. up to 100 gr. Ultra Low Drag(ULD) Rebated Boattail(RBBT), still in development at this time
3450 to 3550 fps in 27" barrel
Designed for long range coyote hunting with minimum pelt damage. Also intended for pronghorn hunting and lighter deer at moderate ranges(400 yards and less.
Appropriate loading powders: H-870, H-US869, AA8700 and WC872

257 Allen Magnum
338 Rem Ultra Magnum parent case, necked down to 257, fireformed to min body taper and sharper shoulder angle.
100 gr.(4100 fps)up to 156 gr. ULD RBBT(.820 bc) 3350 fps in 30" barrel length
Design purpose for long range pronghorn and deer hunting. Out to 800 yards on heavy deer, 1000+ on pronghorns. Also makes a very effective long to extreme range coyote rifle but a bit hard on pelts
Appropriate powders: H-870, H-US869, AA8700 and WC872

6.5mm Allen Magnum
338 Rem Ultra Magnum parent case, necked down to 6.5mm, fireformed to min body taper and sharper shoulder angle.
168 gr ULD RBBT (still in development)
142 gr. SMK or ULD RBBT at 3450 fps with 142 gr. in 27" barrel, 3550 fps in 30" barrel lengths.
Same design purpose as 257 Allen Magnum but designed for those that prefer the larger selection of 6.5mm bullets.
Appropriate powders: same as 257 Allen Magnum

270 Allen Magnum
300 Rem Ultra Magnum parent case, necked to 270 and fireformed to min body taper and sharper shoulder angle.
130 gr.(3800 fps) up to 169.5 gr ULD RBBT(.740 bc) 3300 fps in 27" barrel length, 3400 fps in 30" barrel length
Designed for game up to 500 lbs at long range, deer and pronghorn out to any range a shooter can place the bullet in the vital zone of his target.
Appropriate powders: H-870, H-US869, AA8700 and WC872


277 Allen Magnum
338 Lapua Magnum parent case, necked down to 270 and fireformed to min body taper and shoulder angle.
140 gr.(3750 fps) up to 195 gr ULD RBBT(.920 bc) 3250 to 3300 fps from 28 to 30" barrel lengths
Designed for long range precision big game hunting. Usible on game up to and including elk and moose even out to 1000 yards.
Appropriate powders: H-US869, H-870, AA8700 and WC872

7mm Allen Magnum
338 Lapua Magnum parent case, necked down to 7mm and fireformed to min body taper and shoulder angle.
140 gr.(3800 fps) up to 200 gr. ULD RBBT(.900 bc) 3200 to 3350 fps from 26" to 30" barrel lengths
Designed for long range big game hunting up to and including elk and moose. Has been used effectively on elk out to 1300 yards and has also proven one of the most ballsitically potent rounds in use today including the 277 Allen Magnum and the 338 Allen Magnum. Has proven capable of ½ moa accurate out to 1000 yards and 1 moa accurate out to 2800 yards in good conditions.
Appropriate powders: H-Retumbo, H-50BMG, H-870, H-US869, AA8700 and WC872

338 Allen Magnum
408 Cheyenne Tactical parent case, necked down to 338, shoulder moved roughly 50 thou forward and fireformed to min body taper and sharper shoulder angle.
265 gr. AT RBBT(.920 bc) at 3500 fps in 32" barrel up to 350 gr. ULD RBBT at 3200 fps in 32" barrel.
Designed for heavy big game hunting at long range or standard big game hunting out to extreme range. Has been proven consistant and accurate out to 3008 yards by holding moa accurate out to this range and remaining super sonic in velocity with the 265 gr. AT RBBT.
Appropriate powders: H-50BMG(recommended), H-870, AA8700, US869, WC872, VV 20N29

375 Allen Magnum
408 Cheyenne Tactical parent case, necked down to 375, shoulder moved forward 50 thou and fireformed to min body taper and sharper shoulder angle.
300 gr.(3400 fps in 32" barrel, est.) to 350 gr. SMK at 3300 fps in 32" barrel(est.)
Designed for heavy game hunting or any application where extreme ballistic performance is wanted with a very large kenetic energy payload on impact.
Appropriate powders: H-Retumbo, RL-25, H-50BMG (est.) still in research and development stages at this point.

510 Allen Magnum
50 BMG parent case, fireformed to min body taper and sharper shoulder angle.
750 gr. A-Max or ULD RBBT at 2900 fps in 34" barrel length
Designed for heavy game hunting where legal and extreme range target shooting.
Appropriate powders: H-50BMG, WC872, H-US869, VV 20N29


Allen Xpress Wildcats


257 Allen Xpress
300 Dakota parent case, necked to 257 and fireformed to the Allen Magnum shoulder and body configuration.
100 gr. (3750 fps in 28" barrel) to 156 gr. ULD RBBT at 3050 fps in 27" barrel and 3125 fps in 30" barrel lengths.
Designed for conventional deer hunting out to 600-700 yards.
Appropriate powders: Ramshot Magnum, H-US869, H-870, AA8700 , WC872

6.5mm Allen Xpress
300 Dakota parent case, necked to 6.5mm and fireformed to Allen Magnum shoulder and body configuration.
100 gr. (3800 fps in 30" barrel) to 168 gr. ULD RBBT (still under development)
Designed for same use as 257 Allen Xpress but for those that prefer the 6.5mm bore diameter.
Appropriate powders: same as those for 257 Allen Xpress

270 Allen Xpress
300 Dakota parent case, necked to 270 and fireformed to Allen Magnum shoulder and body configuration.
130 gr. (3500 fps in 30") to 169.5 gr. ULD RBBT at 3200 fps in 30" barrel
Designed for medium size big game out to ½ mile range.
Appropriate powders: H-1000, Rl-25, Retumbo, Ramshot Magnum

300 Allen Xpress
338 Lapua Magnum parent case, necked to 30 cal and fireformed to the Allen Magnum shoulder and body configuration.
180 gr. (3450 to 3550 fps in 27-30" barrel) to 265 gr. ULD RBBT(3000-3100 fps in 27-30" barrel)
Designed for medium to heavy game at long range, deer, elk and moose specifically
Appropriate powders: H-1000, Retumbo, Rl-25, US869

338 Allen Xpress
338 Lapua Magnum parent case, fireformed to Allen Magnum shoulder and body configuration.
200 gr. (3350 to 3450 fps in 27-30" barrels) to 300 gr. SMK or ULD RBBT (2850 to 2950 fps in 27-30" barrels)
Designed for heavy game out to long range.
Appropriate powders: H4831, Rl-22, Rl-25, H-1000, Ramshot Magnum, Retumbo

375 Allen Xpress
338 Lapua Magnum parent case, necked up to 375 and fireformed to Allen Magnum shoulder and body configuration.
260 gr. (3150 to 3250 fps in 27-30" barrels) 300 gr. (2900 to 3000 fps in 27-30" barrels)
Designed for heavy and dangerous game.
Appropriate powders: H-4350, H-4831, Rl-19, Rl-22


Allen Tactical Wildcats

458 Allen Tactical
408 Cheyenne Tactical parent case, Necked to 458 and fireformed to Allen Magnum shoulder and body configuration.
Bullets under development: 600 to 750 gr. ULD RBBT, estimated velocity 2550 to 2350 fps in 32" barrel.
Designed for heavy tactical use or Dangerous game hunting.
Appropriate powders: Still under research and development stanges
50 Allen Tactical
408 Cheyenne Tactical parent case, Necked up to 510 cal and fireformed to Allen Magnum shoulder and body configuration.
750 gr. ULD RBBT or A-Max(2450 fps in 32" barrel)
Designed for heavy tactical use for 50 BMG class performance but in much smaller and lighter tactical style rifles. Also usable for dangerous game hunting.
 
Recent news for ALLEN PRECISION SHOOTING

There will be a new pony in the stable soon. The 410 Allen Magnum and possibly the 410 Allen Xpress as well.

I have found a source for a lead core VLD RBBT 408 bullet and have samples headed my way. The ones I am getting are 420 gr versions with BC predicted to be in the .8 range.

The 410 AM will simply be the 408 CT with the shoulder and body configuration modified to the Allen Magnum configuration, should offer 150 fps over what the standard 408 will offer.

Richard will also be offering 408 bullets if he can ever get his die maker to get the dies figured out and made and on the way.

Just an update on whats new, I predict the 410 AM will be making noise by this spring.

Brass situation is also working out more and more every day. First big order of Jamison 408 cases arrived. THis batch is spoken for by customers but will be placing another order soon. I can not get the same velocity potential out of these Jamison cases as I could with the TTI cases but they allow us to get bullets in the air and with slightly reduced loads, i tlooks like 5-6 firings are possible. 3250 fps aint all that bad with a 300 gr SMK!!!

Just an update. Will post some pics of the 408 sample bullets when they get here.

Kirby Allen(50)
 
More updates from APS.

I have been working with a manufacturer to produce my "Painkiller" muzzle brakes. The first prototypes are supposed to be headed my way right now. These will be about the most aggressive muzzle brake we have seen while still being cosmetically good looking. At this time, there will be two models.

One for my large Xtreme Heavy Sporter rifles. They will have 5 ports very similiar to my standard 5 port Slab brake. Main difference is that the "PK" brake has a 30 degree back angle on the ports. Will they be loud, yep, will they be more efficent at reducing felt recoil, YOU BET!!!

They will work on barrels with a muzzle diameter of 0.825" up to 1.050".

The second brake is a more conventional sized brake. Very similiar to the larger model with its 30 degree back angle on the ports but it will only have three ports instead of 5 and it will also have a small top vent port in each expansion chamber to control muzzle jump. Designed for more conventional barrel sizes. These will work on barrels with muzzle diameters from 0.675" up to around 0.850" diameter.

I will be offering these brakes as loose componant sells as well as actually fitting them to rifles. As soon as I inspect the prototypes and approve them the main production will get the go ahead.

Price has not been set yet on these brakes but we will keep them comparible with current brakes on the market now.

Kirby Allen(50)
 
ImportedPhotos00006-3.jpg


ImportedPhotos00008-1.jpg


ImportedPhotos00011-2.jpg


This is the medium size PK brake. You can see the muzzle diameter is slightly oversized for this size of brake but still works fine. This brake is mounted on my Raptor 300 Allen Xpress and recoil is quite comfortable when shooting a 240 gr SMK loaded to 3200 fps.

I am told the large 5 port PK brakes will start showing up later this week.

Kirby Allen(50)
 
Sweet, thanks Kirby. I'll have to put one of those on the 7mm AM whenever i can scratch up the dough for the action and get her started :rolleyes:
 
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top