Testing Barnes Tipped Tripple Shocks in 308


Well-Known Member
Dec 25, 2007
Youngsville, NC
I have a model 7 Remington with a new 20" Broughton 1;12 5C barrel.

I am currently shooting 150 grain Nosler Accubonds sub .5" at 100 yards.

I have been trying some 130 and 150 Tipped Barnes Tripple Shocks.

The bullets have been seated .050" off the rifling over H4895 and Varget.

The 150s have shot best with a .750" 5 shot group the 130s have not shot better than 1.0".

I talked with Barns bullets today and they suggested trying Tac and seating the bullets closer to the lands.

Have any of you tried the 130 and 150 Tipped Tripple shocks in a 308.

The primers did not appear flattened with presure with a very stiff load of powder.

The balistition at Barnes stated I should be able to acheive groups in the .4" range consistently. He indicated with TAC powder he was getting 3182 FPS.

I would like to hear from some others who have tried the 130s and 150s tipped Tripple shocks.

Nat Lambeth


LRH Assistant
Here are some related products that LRH members are talking about. Clicking on a product will take you to LRH’s partner, Primary, where you can find links to LRH discussions about these products.


Recent Posts