• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

take a look

soundwaves

Well-Known Member
Joined
Feb 19, 2009
Messages
529
Location
TURKEY
IMG_2659.JPG

IMG_2660.JPG

IMG_2661.JPG
barrel seems dead. l took apart the barrel and action from the stock to cleen it and put it back for the first time this week. could that do this aswell ? never took a stock off before. :D 3 shot groops dont take notice of other holes around the groops. distance 50 meters.
 
Did it shoot better before you took it apart ?

If so you probably need to bed the action and torque the action screws.

If you cleaned the bore to white metal, you may need to re season the bore by shooting it.

J E CUSTOM
 
Did it shoot better before you took it apart ?

If so you probably need to bed the action and torque the action screws.

If you cleaned the bore to white metal, you may need to re season the bore by shooting it.

J E CUSTOM

well the simplest answer l can give is.. after takeing it apart but leveing the scope on, the zero went from dead on at 100 yards to 5 inch high at 100 yards. its a heym sr 30 so the barrel doesnt screw on anywhare its a complate 1 piece steal.. bolt - barrel- and triger.
If you cleaned the bore to white metal, you may need to re season the bore by shooting it. can someone explane this pls ?
 
Last edited:
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top