So here is the thing. going to try some reloader 26 in a 30-06 shooting with180 grain flat base bullet. I have Done made up the first test round using the standard primers 210F but have not shot them at the range. Started at 58.5 gr and going up in charge weight. My question is would there be any discussion on using the magnums 215 primers since the case fill is so high and the burn rate of this powder.
In the past the only thing I've done is try different primer brands.
Additional info. Reason I'm trying RL26 is trying to find a couple powders for all guns I reload and the H4350 I typically use has been a little challenge to get my hands on but not impossible. If this don't work with RL26 I'll just go and find some 4350.
In the past the only thing I've done is try different primer brands.
Additional info. Reason I'm trying RL26 is trying to find a couple powders for all guns I reload and the H4350 I typically use has been a little challenge to get my hands on but not impossible. If this don't work with RL26 I'll just go and find some 4350.
Last edited: