• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SAAMI 30 Nosler and 215 Berger

FURMAN

Well-Known Member
Joined
Aug 29, 2010
Messages
3,415
Location
Kansas
I was not sure where to put this. Ok, I just got my hands on a Christensen Arms Ridgeline 30 Nosler. I crunched a lot of numbers over and over. With the boattail junction seated at the neck shoulder junction a 215 Berger is .020 off the lands in this chamber(SAAMI). If I were to order a custom reamer I would go .020 more but I think the SAAMI will be ok. I plan on working up a load and seeing how it compares. My comparison will not be apples to apples. My 300 win has a 28" nitrided barrel.
bcJuRhal.jpg
 
Ive been thinking about building a 30 nosler for the 215s. What is the oal with the bullet seated to the shoulder junction? Curious if it will feed in a standard long action without an extended box?
 
Warning! This thread is more than 8 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top