Right path

DOOKSUX

Member
Joined
Jan 2, 2011
Messages
5
Location
morehead city. NC
I currently shoot a 7mm rem mag 140gr. Barnes triple shock. My groups are about 3/4 in. at 100yds. , 300yds. is about my max. comfortable range. I would like to be able to go out to 500yds. I'am thinking about going to a 168gr. hsm hunting round , sending my leupold 3x10x50 back to leupold and having the CDS system installed. Am I going down the Right Path or is this a total waste of time? Obviosly I'am new to trying to shoot at a longer range any knowledgeable help would be appreciated.
 
Dooksux, Are you handloading or shooting factory ammo? If handloading, look at sierra match kings, or Berger bullets. I don't shoot a 7mm so I am not sure what bullets are avilable from those guys for a 7mm, but go with the heavier bullet available.

In my opinion 10X is pretty minimum magnification for 500 yards. I would suggest you trade up to something with higher magnification.
 
You will want to do some homework before sending your scope in.

You will want to pick a load that shoots good at 300-500 yds. Then you will need to figure out how much drop you have at the distances of 200, 300, 400, 500 ect. Figure out how many clicks your scope takes to adjust point of aim to those drops (not all scopes move the poi the advertised amount). Record the temp and altitude and Barometer on the days that you do this, because the drop will vary a little if you change altitude by alot or if the temp changes alot.

Another option is to have them do a custom drop reticle. This eliminates the click value out of the process. Either way, you'll want to decide on the load/bullet/velocity and actually shoot it out to 500 or whatever distance you think will be max BEFORE you send it in.
 
Give the HSM stuff a try, a co workers 7mm Sendero stacks them up at 600 yrds, he hasn't taken it out any farther. Defiantly lock it down before sending in the scope!
Your 140's should make it to 500yrds, I don't shoot 7mm's but the 270's have no problem with 140's at that range so I would think you could get it out there.
 
i am older. i like a little higher power scope. i like leup. i like the 7mm mag. 99 % of long range shooters reload.
 
I shoot factory loads,( federal premium), I thought HSM might be the best factory load I could buy. I'am sure my optics are'nt quite strong enough plus I have a heavy reticle not good for longer shots, but works well after sunset. Thank Y'all for helping out on this.
 
What you're shooting with is perfectly capable of accurate shooting out to 500. All the guys above gave you good advice. The only concern (if a legitimate concern at all) is shooting factory and hunting loads. Match grade ammo or your own reloaded ammo would be a great benefit. Your heavy reticle shouldn't pose a problem at 500.

Good luck.
 
thanks for taking a look at it, do u think I'll see much difference between a 140gr. federal pre. and HSM 168gr. bullit?
the 140 tsx is a pass trough bullet. the 168 berger even though it is heavier is softer and does not pass through.
 
You are on the right path with HSM, I would however suggest you try the 162gr Amax HSM ammo. The Amax is a pretty good all arounder for LR type shooting. The 168 is also real good, but I have to give the nod to the Amax HSM loading. Then again give them both a try! Your rifle may Love one, but not like the other, it happens sometimes.

Gary
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top