replacing Savage extractor

[wildcat westerner]

Hello,
I have a Savage rifle that with the addition of a custom recoil lug and Krieger barrel, is very accurate. Since I have had it for so long, I took it out and did some prone shooting with it and faced the fact that ejector has never really worked well. Furthermore, I have a friend with a newer 6.5 Creedmoor and from the factory that rifles' extraction and ejector never worked. It was fixxed. Is there an aftermarket system that will solve this problem permanently?

 

[tobnpr]

No first hand experience with these, might help...
Not much you can do with a plunger style ejector other than a stronger spring. Some Savages have a beveled end on the ejector, some do not- mine have beveled edges and I haven't had issues with them; might just be luck of the draw...


http://www.sharpshootersupply.com/ look under bolt parts

SS-2401 Savage Enhanced Extractor/Ejector Kit

www.kinneysshootingsupply.com