QL help 270 win

[Highvoltage]

I'm looking for quick load data for my 270 Winchester. I'm looking at trying 145 eldx with 7828ssc. Win brass, cci lr primer, 24" barrel. If anyone could help me out that would be greatly appreciated. I have a bunch of both laying around so I figure why not try and put something together. Thanks in advance!! Best wishes

 

[Seabeeken]

Here from hodgdon. Start here and work up

 

[M1A1ABRAMS]

I'm looking for quick load data for my 270 Winchester. I'm looking at trying 145 eldx with 7828ssc. Win brass, cci lr primer, 24" barrel. If anyone could help me out that would be greatly appreciated. I have a bunch of both laying around so I figure why not try and put something together. Thanks in advance!! Best wishes

Hornady 1st edition

 

[M1A1ABRAMS]

Nosler /Sierra manual

 

[M1A1ABRAMS]

Nosler /Sierra manual

 

[M1A1ABRAMS]

Hornady 11, Not sure how the pics got turned around, I'm not very tech savvy. lol

 

[Grizzman47]

How many grains of water does a fired and not resized case hold, with the water level flat at the case mouth?

What are the intended overall cartridge and brass lengths?

 

[M1A1ABRAMS]

I'm looking for quick load data for my 270 Winchester. I'm looking at trying 145 eldx with 7828ssc. Win brass, cci lr primer, 24" barrel. If anyone could help me out that would be greatly appreciated. I have a bunch of both laying around so I figure why not try and put something together. Thanks in advance!! Best wishes

Sorry if I get manuals screwed up with pictures. Hard to see on phone. If you need clarification on something just let me know

 

[Highvoltage]

Greatly appreciated. As far as water and oal I haven't done any measurements. I'm basically just gathering as much info as possible right now. It's my understanding 7828 isn't that temp stable but 6.5 saum loves it. So I figured why not try it in the 270. That Speer 150 looks good with 7828. I see hornady doesn't have anything listed under the 145 eldx. I think a 145 around 2950-3000 would be a fun little round to stretch out.

 

[Grizzman47]

I used the case capacity from my .270, an overall length of 3.450", and a case length of 2.540". QL showed a max charge for IMR 7828SSC to be 62.2 grains (at 103.3% case fill) delivering 3128 fps from a 24" barrel.

98.8% of the powder was burned within the barrel. Pmax and Z1 are .7" of barrel length apart. Barrel time is 1.106 ms.

 

[Highvoltage]

Thank you!!

 

[just_jon]

Here you go.