Push feed or controlled feed?

What CRF action are you comparing?
I only have first hand experience with an older Savage 110 7RUM. Never handled any others.

My push feed is limited to Rem 700 and Savage 10/110 actions.

I've never noticed a difference between any of them and wonder if others can tell a difference - and why they might prefer one to the other.

I am not aware of the different CRF actions and what would make them feel different or make one more/less reliable than another.

I know Ruger is marketing their Hawkeye rifles having "Non-rotating, Mauser-type controlled round feed extractor" - but I don't know if this means they are true CRF.
 
My first centerfire that I hunted was my dad's 8mm M98. He'd put a Lyman 48 on the stern and a Bishop under the steel; not sure about the bow accoutrements, but I could hold 2" groups at 100 paces. That is before going into the woods. I'm thinking I'd had to have a passel of luck to whack anything smaller than a moose at over 100 yards while hunting and returning home? Well, let's just say me targets were lucky indeed. I hadn't made five feet tall yet and hovered--when fully clothed and a bit wet--right at 100 pounds. But I hunted just about every day in spite of all the jokes--use your imagination, please--and now and again something fell down in front of me that either died from laughter or somehow... **** thing was soooooooooo heavy; gained weight exponentially every time I liberated it, trigger pull seemed about my weight and the safety, well, while it always worked was really awkward for me at the time. However, the worst part of Peter and Paul's genius was that the bolt bound nearly every time it was yanked rearwards. Otherwise I just loved that rifle. The next adventure was with my girlfriends dad's Husqvarna lightweight 30-06. Another animal altogether. The rifle was a beauty though--a tamed 98.

As a sophomore in High School it finally happened. New girlfriend; out with the old. That was 1961 and the gal's name was Winchester, Model 70 270 Winchester. True love 'dat--still be and I took on the sisters too all 270s and one 375. And while I might change a few other things that happened along the way I'll just leave my Winchester experience the way it was, the way it is. There's two Model 12s in there too--and a 52D, but...
 
The feel of a well timed and tuned CRF seems to be a bit smoother to me. I have a couple newer M70 crf actions, bolt action is nice and slick. I also just picked up a LAW rifle, cheap as a rifle to start a build off of, that action is super smooth. It matches any of my custom actions for feel.
I don't think there are any relibility issues between push/crf, but if a crf is set right the action is super smooth. You can force a miss feed in any action if you want to, run the bolt like you know what you are doing and they both work fine.
 
Even a push feed is controlled to some extent. Not by the bolt face or extractor but by the feed rails. By the time the case is free of the rails half of it is in the chamber already.
Shep
 
All other things being equal, if you have a failure to extract a fired case and the extractor pulls through/tears the case rim, it is far more likely to be one of those dinky, money-saving extractors than a big Mauser or Winchester.
That's why they are called "Big Game" rifles. Which would you prefer when facing a Griz , or two?
 
For my all around hunting and truck gun I use crf have both mausers and pre 64 model 70 win, for tripod or bench shooting it doesn't matter much, but I've seen people dump rounds out of a rem 700 on a few occasions.
 
Last edited:
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top