Nosler 33 load data help

[bgbuck153]

The barreled action just got mailed out to me so I need some load data if anyone has some to share.

I've got:
H1000
H4350
Retumbo
Rel 33
N570

and;
210 gr scirocco 2's
220 gr partitions
246 gr hammer hunters
265 gr longrange accubonds.

 

[MagnumManiac]

What does Nosler have on their website?
I currently do not own a manual that even has any Nosler/PRC/Norma data for any of these new cartridges.
You can use 338 RUM data to start with to extrapolate loads by reducing the start loads.

Cheers.

 

[bgbuck153]

They don't have the powder I listed with the bullets I've listed. I was hoping someone had a combo of my list.

 

[bgbuck153]

I have a H1000 with 250gr berger data

 

[just_jon]

I ran some data through QL and the wizard behind the curtain spit out the following. QL does not list a 220 Nosler Partition so I went with the 225 grain Partition. We are waiting with baited breath to see hammer bullet data in QL so I could not help you there. Suggest you contact Steve (RockyMtnMT) at Hammer for assistance. When I run QL data, I generally use a 95% fill rate as a starting point. Many of these combinations required 115% before QL would show max pressure data.

As always, proceed at your own risk. Data provided for educational purposes only.

 

[bgbuck153]

When I click on the pictures it asks me to download but it won't download. I'm gonna PM you

 

[bgbuck153]

I figured it out. Thank you.
Could you run the 265 LRAB please in your QL system?

 

[LongBomber]

Retumbo and the 265 lrab maxes out a bit over 77gr in my rifle. I am limited to saami max length, if you are seated longer there is considerably more case capacity to gain.

 

[bgbuck153]

What kind of velocity are you seeing Longbomber?

 

[LongBomber]

What kind of velocity are you seeing Longbomber?

Pretty slow actually, all my speeds seem under what most guys report but are fairly close to the hodgdon manual.
The 265/retumbo runs at 2665.