Night force scope mounts

[yankee outlaw]

I have a nf 5.5 22 x50 30 mm tube scope mounted on a tikka t3x
it has about an 1/8 inch of clearance using nf rings .885/low
I am replacing it with a nf atacr 7 35x56 its a34 mm tube
my ? is what scope height rings do I need to get the new scope to fit hope fully as close as possable
thank you
don

 

[ultraedge]

I would go with 1.125 height. 1" height will work,but on a heavy barrel you may not have enough clearance for the scope cover.

 

[yankee outlaw]

ok thank you for the info

 

[Greyfox]

I agree that 1.125" will work well and give a bit of extra clearance with the NF scope covers. This is my ATACR F1 with 1" NF Extreme duty rings. I have about 1/16" clearance with scope covers with my medium Palma barrel. I like them close.

 

[yankee outlaw]

I would go with 1.125 height. 1" height will work,but on a heavy barrel you may not have enough clearance for the scope cover.

ok thank you for the info

 

[yankee outlaw]

yes sir that's a nice fit I also like them close thanks