Need 300 RUM & 180 AccuBond Loads

JohnW

Member
Joined
Jun 2, 2007
Messages
5
Location
Florida
I have RL 25 , Retumbo & IMR 4350 powders and want to load some 180gr AccuBonds for my Rem XCR in 300 RUM. Anyone have load data with components I have on hand that work well thanks?
 
96.0 grains of RE25 has worked for me and my buddies with Remington 700 Senderos. We all use the 180 Accubond. FED 215m primers as well. Work up slowly. This is a hot load. We usually find good groups in the 94-96 grain range.
 
Thanks for the info. I have used 96.5gr RL 25 with 180gr Gamekings but this is my first try with Accubonds I'll work it up and give it a try.If RL22 works that well I may have to try it to.
 
Warning! This thread is more than 17 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top