Cybra
Well-Known Member
Hello to all!
Hopefully a few of you might offer me some insight; I could certainly use it. What I would like to know are some numbers on neck clearance that some of you utilize. Currently I'm running a .338-378 with about .0015" clearance *per side*, and am thinking when the throat goes to hell <the eneviditable, sadly> I may try something tighter. In the meantime, and more pressing to me, is another project {it's a mouse-gun, but no laughing now!}, based on a 6PPC with a sharp shoulder <40 degree>, firing 95gr VLDS. I am thinking a half-a-thou per side. So what do you fellows run? I admit, I like things on the tight side [don't post my comments on FriendFinder, please
], but would truly appreciate a few experienced comments. pros, cons, etc. Primarily, this will be a bench number, and I'm a meticulous cleaner, so blowing my digits off shouldn't occur....
Thanks, guys. One of these days I'll get smarter and can help inform some of the goofs like myself!
Dave
Hopefully a few of you might offer me some insight; I could certainly use it. What I would like to know are some numbers on neck clearance that some of you utilize. Currently I'm running a .338-378 with about .0015" clearance *per side*, and am thinking when the throat goes to hell <the eneviditable, sadly> I may try something tighter. In the meantime, and more pressing to me, is another project {it's a mouse-gun, but no laughing now!}, based on a 6PPC with a sharp shoulder <40 degree>, firing 95gr VLDS. I am thinking a half-a-thou per side. So what do you fellows run? I admit, I like things on the tight side [don't post my comments on FriendFinder, please
Dave