Mods are finally done!
- Thread starter Idgunner
- Start date
Idgunner
Well-Known Member
Can't do anything to the trigger other than have the sear polished. There are no aftermarket triggers for this model. The stock accutrigger does a good job though.
Bullet bumper
Well-Known Member
- Joined
- May 20, 2009
- Messages
- 1,045
- Reaction score
- 41
I like it very much looks awesome and a laminated stock with good bedding system can shoot very well as they are rigid and resist warping .
The only thing I would do if it was a bigger cartridge would be to move the front ring forward more and drop the anti cant level back . This will give the long objective housing more support . Probably not an issue on a 223.
The other thing is make sure you have a rigid connection between the bi-pod mount and the stock as slight movement here can spread the group slightly .
Nice work , post some three shot groups .
The only thing I would do if it was a bigger cartridge would be to move the front ring forward more and drop the anti cant level back . This will give the long objective housing more support . Probably not an issue on a 223.
The other thing is make sure you have a rigid connection between the bi-pod mount and the stock as slight movement here can spread the group slightly .
Nice work , post some three shot groups .
Idgunner
Well-Known Member
D
Deleted member 46119
Guest
What bipod is that? It looks like square tube.
Idgunner
Well-Known Member
It is a UTG. Very inexpensive. easy to put on and take off. I love it.
https://www.amazon.com/dp/B00AQH2M44/?tag=lrhmag19-20
I've had it for several years and it never fails.
mountainman56
Well-Known Member
Very nice indeed! Obviously shoots too gun)
Idgunner
Well-Known Member
It does thank you. A few days ago a friend went chuck hunting with me and I spotted chucks at 487 yards. Three of them. Three shots later they were all dead. Love that gun.
