Mods are finally done!
- Thread starter Idgunner
- Start date
Help Support Long Range Hunting Forum
Can't do anything to the trigger other than have the sear polished. There are no aftermarket triggers for this model. The stock accutrigger does a good job though.
Bullet bumper
Well-Known Member
- Joined
- May 20, 2009
- Messages
- 1,045
I like it very much looks awesome and a laminated stock with good bedding system can shoot very well as they are rigid and resist warping .
The only thing I would do if it was a bigger cartridge would be to move the front ring forward more and drop the anti cant level back . This will give the long objective housing more support . Probably not an issue on a 223.
The other thing is make sure you have a rigid connection between the bi-pod mount and the stock as slight movement here can spread the group slightly .
Nice work , post some three shot groups .
The only thing I would do if it was a bigger cartridge would be to move the front ring forward more and drop the anti cant level back . This will give the long objective housing more support . Probably not an issue on a 223.
The other thing is make sure you have a rigid connection between the bi-pod mount and the stock as slight movement here can spread the group slightly .
Nice work , post some three shot groups .
D
Deleted member 46119
Guest
What bipod is that? It looks like square tube.
It is a UTG. Very inexpensive. easy to put on and take off. I love it.
https://www.amazon.com/dp/B00AQH2M44/?tag=lrhmag19-20
I've had it for several years and it never fails.
mountainman56
Well-Known Member
Very nice indeed! Obviously shoots too gun)
It does thank you. A few days ago a friend went chuck hunting with me and I spotted chucks at 487 yards. Three of them. Three shots later they were all dead. Love that gun.
