chad
Well-Known Member
Anyone shoot these out of a 280ackley?
What wod be a good powder for the 150 grain? Temp stable powder only.
What wod be a good powder for the 150 grain? Temp stable powder only.
Longrange accubonds
- Thread starter chad
- Start date
runshort
Well-Known Member
I worked up a load with the 150 Nosler LRAB in the standard .280 Rem. and ended up using H4350.
I MR 7828 SC gave me a little more velocity but H4350 was more accurate.
Might be worth a try if you happen to have some on hand.
chad
Well-Known Member
I have both. What was your loads? Veloc?
runshort
Well-Known Member
With the I MR 7828 we started getting pressure signs at 2940ish. With out looking I don't remember how many grains that was. With H4350 we ended up at 51.7 with velocity a hair over 2900. Not a Lazer by any means but still respectable for the the .280 Rem 1/9 24". With this load I've been able to hold .5 moa out to 600 yds. 3 of the last 4 outings to the range. This bullet seems to like some jump compared to the standard accubond. I ended up tweaking the depth to around .03 off for the best accuracy. Good luck with your load development.
chad
Well-Known Member
Thanks.
Fotis
Well-Known Member
chad
Well-Known Member
Post the link please
Fotis
Well-Known Member
