Hydrodip question

[Steel Rain]

Would it be a problem to hydrodip a rifle stock that has been painted with Krylon?

 

[Hired Gun]

Not as long as the paint is cured well. The Hydro dip films don't really have much if any solvents in it that will react with other products. By itself it does come off real easy. Most applicators use a tougher clear of some sort over it.

Disclaimer: I am not formally trained in hydro dip. My experience is based on customer feedback.

 

[Steel Rain]

Not as long as the paint is cured well. The Hydro dip films don't really have much if any solvents in it that will react with other products. By itself it does come off real easy. Most applicators use a tougher clear of some sort over it.

Disclaimer: I am not formally trained in hydro dip. My experience is based on customer feedback.

That is good to know. I modified a stock and used some Marinetex to add some texture to a couple of areas. Planning to dip it but have a course I'm going to in a couple weeks. Also going to have some bottom metal installed. So, I was just going to Krylon it, ise, send in for bottom metal, then have it dipped after.

 

[EddieHarren]

I would consult the person who is going to do the dipping.