hs precision m24 stock question

harleybug

Well-Known Member
Joined
Oct 30, 2014
Messages
196
I really want to buy this stock but im putting a sendaro contour barrel on my rifle and stockys says the stock is cut for a 9.80 contour at the muzzel. My barrel is 8.30 so im worried that it will look stupid with a huge gap around the barrel. Anyone use this stock with this contour.if so how does it look. Thanks for the help.
 

FurTaker

Well-Known Member
Joined
May 12, 2014
Messages
124
Location
Oklahoma
I cant comment on your particular situation but for scale I'm running a factory sporter barrel in a HS stock made for a Sendero contour and it looks fine
 

just country

Well-Known Member
Joined
Aug 6, 2014
Messages
1,651
Location
78154
morning, I have the same stock on a 7mmwsm. there is a gap, I have a #4.5 contour on the stock. I changed to this stock because of accuracy. the group tighten up to .40. the stock is very comfortable. I ordered one for my custom 340bee. this rifle has a #7 contour barrel. I have this stock on 6.5mag., 257Bee, and 257AI.

will u have a small gap depending on the #contour of the barrel yes, torque ur screws as directed. this stock will shoot. I prefer HS stock, is the same quality as McMillian. McMillian is way over priced and very hard to get since the company was bought out.

accuracy is more important than looks, plus u will very much like this stock.

enjoy
just countrylightbulb
 

harleybug

Well-Known Member
Joined
Oct 30, 2014
Messages
196
I do like the stock and accuracy is important but i also dont want a giant gap thats my only worry. .830 to .980 is a big difference thats my only concern
 

Greyfox

Well-Known Member
Joined
Jan 21, 2008
Messages
5,712
Location
Northeast
Given the heavy barrel/forearm relationship of the combo,, proportionally I think you can get away with the gap without looking too bad. The difference in OD at the muzzle of .150" will give s gap of about .075", a little larger than 1/16".
 

Greyfox

Well-Known Member
Joined
Jan 21, 2008
Messages
5,712
Location
Northeast
Thats not to bad. I think i may do it then.

Just wanted to explain how I came up with the numbers. You had barrel contours of 8.3(Sendaro) and 9.8. I assumed thst this referenced the standard .83" muzzle OD of the Rrminton Sendaro/varmint barrel and the .98" muzzle OD of the Stockys M24 stock. If the muzzle OD of your rifle is .83" those gap sizes should be very close, depending on the gap that the Stocys uses to accommodate the M24 barrel. You always have the option of taping your barrel to the desired gap and bedding the barrel channel. Its an easy job. If the stock is black you can color the bedding compound.
 
Top