Broz
Well-Known Member
Also, how do you enter wind direction? is it a clock, degrees or 1/4 , 1/2 , 3/4 and full value?
Thanks
Jeff
Thanks
Jeff
You don't enter a direction all wind increments are for a full value wind.
I hope I am not asking too many questions or ones that have been covered here before. But this info could be good for the thread as well.
So, Does it accept G1 and G7 BC's ?
Also can you enter multipul BC's and low end velocities?
Thanks again
Jeff
Broz,
It takes G1 and G7 BC's. Not sure about the multiple BC's but it has the trajectory validation tool witch will fix error in your trajectory curve.
Scot E.
Thanks Scott, I would assume the trjectory validation does it by changing muzzle velocity up or down. Or does it have a way to alter BC and velocity to better fine tune the curve? I would think that would equire entering multipul distances at once for validation. Is that an option?
Thanks for the video, it is a good one, even though I was aware of these methods. I have had mixed results with the aiming of the wind meter in target direction. But that could easily been from a varying wind speed too. As you mentioned there is a lot of field time required to be able to read wind effectivly. About the time you think you have it whipped it will kick your butt.
Jeff
I believe they have you shoot at your maximum range, or as close to it as you can, and then enter the trajectory validation info from that distance. Then it will adjust the entire curve.
This sounds like it would be something that would take more practice than a ballistic program with the clock system and finer mph increments. But I feel with a lot of practice a faily accurate level could be achieved. But for sure a lot of guestmating. Probaby not nearly as big of a challenge for an advanced long range hunter, but for the moderatly experienced hunter that does not shoot all the time it could be an issue. I will mull this over and then discuss it with my friend. I was about ready to pull the trigger too, but now I am undecided again. Maybe I think to much...
I hate wind!!!
Jeff
like several members here, i am seriously considering this unit, along with the vectronix plrf05. The vectronix is being offered on a group buy over on snipershide. Davidsons, would you consider a group buy for lrh members?
Group Buy - Vectronix Terrapin (PLRF05) - Sniper's Hide Forumsi tried to find the price of the group buy vectronix at sniper hide..
Found nothing ..if you know ,,what was the price.