I'm looking to put together a custom rifle with am wondering if anyone can recommend a smith with experience with truing a 6 lug mk 5 action. I am located in Wisconsin. The smiths I have talked to do not have a mandrel for this and thus aren't able to help. Thanks in advance.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Gunsmith who can true a Weatherby 6 lug mk 5 action?
- Thread starter cab
- Start date
Help Support Long Range Hunting Forum
Pm sent
Hired Gun
Well-Known Member
I am curious what you came up with for truing a Weatherby action. It would be a real feat to recut the lug abutments and get all 3 rows to run the same tension on the bolt lugs.
just country
Well-Known Member
morning, I asked my smithy to true my weatherby action. I was informed
machining step is not necessary on weatherby actions. when manufacturing
a weatherby action the blueprinting and truing r in the process. I just built
a 7mmwbee timmey trigger, hart # 7 contour H&S combat action stock.
145 Barnes bullets 4831SC. very very accurate.lightbulbgun)
machining step is not necessary on weatherby actions. when manufacturing
a weatherby action the blueprinting and truing r in the process. I just built
a 7mmwbee timmey trigger, hart # 7 contour H&S combat action stock.
145 Barnes bullets 4831SC. very very accurate.lightbulbgun)
J E Custom
Well-Known Member
morning, I asked my smithy to true my weatherby action. I was informed
machining step is not necessary on weatherby actions. when manufacturing
a weatherby action the blueprinting and truing r in the process. I just built
a 7mmwbee timmey trigger, hart # 7 contour H&S combat action stock.
145 Barnes bullets 4831SC. very very accurate.lightbulbgun)
He is correct to a point. the recoil lugs are machined as annular rings and then the relief cuts are made to engage the action lugs (They are done the same way) normally all that cam be done is to lap the surface to make it smooth to aid in operation. (This is not a must)
The rest of the action however, needs to be checked for square. (The Weatherbys are normally very good), but sometimes you will find a bolt face or receiver face that Is not square or true to the bolt centerline like most all actions.
J E CUSTOM
JJMoody
Well-Known Member
I called Weatherby themselves about installing an Accubrake on my 9 lug mk5 a few months ago and in the process asked them about squaring the receiver and bolt face. They offer this in the custom shop for a hundred and some-odd dollars (don't quote me on that). Hey also have #3 fluted Criterion barrels available for around $540ish installed.
MudRunner2005
Well-Known Member
Stay away from their Criterion barrels. And for $540 (at a regular gunsmith), you could have a **** cut-rifled Krieger, Barltien, Brux, Shilen, or most any other quality brand barrel installed. MUCH better barrels.
My experience with a Weatherby Criterion was about as far from positive, as anyone could imagine. Which is why I warn folks about them.
J E Custom
Well-Known Member
+1
The Weatherby action is about the best factory action made but the criterion barrel is just about on par with other factory barrels (Some good and some not).
For less than $400.00 you can buy a first class custom barrel.
I have made a few criterion barrels shoot after doing some extensive changes to head space, chamber and bedding. But they have not been very consistent barrel to barrel.
Just my experience with them.
J E CUSTOM
