Browning X-Bolt Hell’s Canyon Long Range 6.5CM

IdahoHunter208

Well-Known Member
Joined
Jul 7, 2019
Messages
90
Location
Boise, Idaho
SOLD! SOLD! SOLD!

Selling my Browning X-Bolt Hell’s Canyon Long Range in 6.5 Creedmoor. Rifle has less than 100 rounds down the tube (92 rounds to be exact). Rifle comes with an Evolution Gun Works (EGW) 20 MOA scope base. I had my gunsmith install the scope base and skim bed the base so it is an exact match up with the action. Trigger has the M-Carbo trigger spring installed which helped lighten the already great trigger to ~2lbs. I will include the 92 once fired Hornady brass and load data. This rifle is extremely accurate as you can see in the photos.

Asking $1,050 shipped to the FFL of your choice if in the lower 48. Rifle is also going to be for sale on my local gun classified’s website.

Details:
  • Chamber: 6.5mm Creedmoor
  • Barrel Length: 26in
  • Weight: 7lbs 3oz
  • Magazine Capacity: 4 + 1
Extras Included:
  • EGW 20 moa scope base ($81)
  • Scope base professionally skim bedded ($75)
  • M-Carbo trigger spring installed ~2lb trigger pull ($15)
  • 92 once fired Hornady 6.5 CM brass ($60)
  • Will include load data for 140gr ELD-M and 143gr ELD-X that got me the groups seen in the photo.
 

Attachments

Last edited:

IdahoHunter208

Well-Known Member
Joined
Jul 7, 2019
Messages
90
Location
Boise, Idaho
Scope base is not permanently bedded/attached to the action. The bedding material is on the bottom of the EGW scope base. The base is attached using the 8 screws that came with the base.
 

IdahoHunter208

Well-Known Member
Joined
Jul 7, 2019
Messages
90
Location
Boise, Idaho
Why are you selling and what ammunition did you use?
only reason I am selling because I had a custom rifle built in 28 Nosler and can use my wife’s 6.5CM if I ever need to. The 92 rounds that were fired through the gun were all reloaded ammo. 140gr ELD-Match and 143gr ELD-X. For powders I tested both RL26 and H-4350. Found H-4350 to be the best with both bullets.
 

Trending threads

Top