rsbhunter
Well-Known Member
Ok, I'm not a gunsmith, but do have fun doing minor improvements to firearms...I have rebarreled Savage's, bedded Rem. 700's, Savages, etc. I got a super deal on a Savage 12 LRVP used and have rebarreled the action to 6mm Norma Dasher. The stock is the HS with the aluminum bedding block. The recoil lug is not bedded, and the action can slide a bit (3/32") back and forward. Thinking about skim bedding the action, and full bedding the recoil lug. Is there any reason not to, or am I wasting time and Devcon doing this. I do make sure the action/recoil lug is seated against the bedding block when I assemble the rifle, but the bedding would remove any movement. The guy's here have a lot of knowledge, so I ask....rsbhunter