barrel question

bjohnson_7

Member
Joined
Jul 14, 2009
Messages
24
I just got ahold of a sendero special barrel in 7mmRM. It is 24" and I have an action to put it on but I was wonderin' what the twist was on it?
 
I just got ahold of a sendero special barrel in 7mmRM. It is 24" and I have an action to put it on but I was wonderin' what the twist was on it?

It should be a 1 in 10 twist.

You can check it with a tight patch by placing a mark on top of the cleaning rod with it almost
all the way down the barrel and while pulling the patched rod backwards watch the mark
and when it comes back up measure back to the back of the action (Where the mark was
made in the first place . This will tell you what it is. If it is a little (1/4 or 1/2" off dont worry
the factory barrel twist are mostly even numbers 1 in 9, 1 in 10 , 1 in 12, ETC.

J E CUSTOM
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top