barrel question

bjohnson_7

Member
Joined
Jul 14, 2009
Messages
24
I just got ahold of a sendero special barrel in 7mmRM. It is 24" and I have an action to put it on but I was wonderin' what the twist was on it?
 

J E Custom

Well-Known Member
Joined
Jul 29, 2004
Messages
10,369
Location
Texas
I just got ahold of a sendero special barrel in 7mmRM. It is 24" and I have an action to put it on but I was wonderin' what the twist was on it?
It should be a 1 in 10 twist.

You can check it with a tight patch by placing a mark on top of the cleaning rod with it almost
all the way down the barrel and while pulling the patched rod backwards watch the mark
and when it comes back up measure back to the back of the action (Where the mark was
made in the first place . This will tell you what it is. If it is a little (1/4 or 1/2" off dont worry
the factory barrel twist are mostly even numbers 1 in 9, 1 in 10 , 1 in 12, ETC.

J E CUSTOM
 
Top