6mm CreedMoor

[Brandon Starkel]

Been working up loads for my custom 6mm CreedMoor, I think I found it for the 90gr Sierra

 

[ShtrRdy]

Looks like a winner. What powder and primer did you end up usong?

 

[Brandon Starkel]

CCI BR Lapua Brass H4350

 

[Buzzsaw]

you can share your recipe we wont bite

 

[ShtrRdy]

you can share your recipe we wont bite

He/She basically did. I wouldn't expect the exact powder charge to be losted.

 

[Buzzsaw]

must be a guarded Government secret then

 

[Brandon Starkel]

Well obviously not all guns and chambers are the same, so I'd didn't really want to say how much 4350 I had in those. But I had 41.5 grains in it. But don't hold me accountable if things go haywire

 

[Brandon Starkel]

Also my Kriegr barrel is 29.5 inches long.

 

[Buzzsaw]

I'm thinking about building a super duper 6mm of some type. I keep coming back to the creedmoor. That's why I'm so nosey , with the long barrel I bet is sizzles !!!

 

[Brandon Starkel]

I'm thinking about building a super duper 6mm of some type. I keep coming back to the creedmoor. That's why I'm so nosey , with the long barrel I bet is sizzles !!!

Yes it does, the most FPS I've gotten out of it according to my LabRadar is 3360 with 87gr VLD hunters. I was still a grain and half under max. And a one ragged hole group The 1:8 twist Kriegr shoots every thing from 87-105 very well, 5 shot groups under a dime unless the Nut behind the trigger messes up.

 

[Brandon Starkel]

So this is from the 95 TMK's, thought I was looking at the 87gr group. I'll find it if your interested

 

[Brandon Starkel]

So this is from the 95 TMK's, thought I was looking at the 87gr group. I'll find it if your interested

 

[Brandon Starkel]

Sorry, this is the 87gr VLD's

 

[Brandon Starkel]

I haven't tried any of the lighter or heavier bullets yet, but I spent some time getting the 105's to shoot, I got them to 1/2" groups.005 off the lands, then stepped them out a thousandth at a time to jammed into the lands, turns out Jammed is what they liked