fmuguira

As mentioned 90 TGK is looonng!! Magazine and throat length may cause problems, ditto with 95 TMK. Also, TGK is a pretty thick/tough...

The Game Changer is a long pointed bullet and may create issues with overall length in the 6x45. However I feel the 80-90gr weight range...

26-27” barrels; whoops !!

A couple of those same guys also have in 25 caliber. 8 twist barrels and shooting 131 to 134 gr high bc; Berger, Hornady, Blackjack...

Think of it as a 6.5-06 AI with a longer neck and not requiring fire forming of brass. A number of friends have them and it’s a heck...

I’ve got four 22 CM rifles. Of the 1000 or more pieces of 22CM brass all but 200 were new 6cm run through a hornady fl die and loaded...

I went 25cm to 22cm with no issues.

You won’t have a problem. Just check length after

With 40° shoulders, I say do it in 3 steps when necking down .020" (.273" to .253" +/-) like .266, .259, .253. I do that from 7mm to...

Yep, die scratchers. Had to polish out a friends 6.5 CM size die cause of nickel cases.

Personally, I will not reload nickel cases. I was given 5 boxes of Federal 338WM Safari Grade ammo with 250g Partition in 1989/1990 and...

Already annealed just wanting to see everyone’s input. Have used friends bushing die before but figured if I could get by with std F/L...

Curious if anyone has ran 6CM brass through a F/L 22 CM die and had good results? No damaged /collasped brass, no doughnuts, etc...

Ttt

Interested in a 56mm objective Leupold Alumina cover if anyone has one not being used/needed. Fits the VX6 and VX5 scopes. Leupold...