44gr hammer hunter

[Dmagna]

Anyone shoot these in a 14 twist? Bought some to shoot in my 22-250 AI, but box says 12.5 but website says 14. Just trying to see if I should just shoot them in my 223 and not waste my time.

 

[RockyMtnMT]

They well run well in the 14" twist. They are nearly a flat base bullet requiring less twist than boat tail bullets. When we first designed the bullet we designated it as a min 12.5" twist. We since changed it to 14" twist. We haven't used up the original box stickers yet!

 

[Dmagna]

They well run well in the 14" twist. They are nearly a flat base bullet requiring less twist than boat tail bullets. When we first designed the bullet we designated it as a min 12.5" twist. We since changed it to 14" twist. We haven't used up the original box stickers yet!

Thanks

 

[just_jon]

Varget is a good place to start. I started my 22-250AI at 41.0 grains and found pressure at 44.5. Settled on 44.3 running 4,337 fps from a 26" 12 twist barrel. Good luck.

 

[huntinghuasna]

Please keep us posted with results. I gifted my son-in-law a Remington 700 in .25-06 a few years ago and working up a Hammer load is on our list.

Steve & just_jon: thanks for the twist and powder suggestions as well.

 

[Dmagna]

Varget is a good place to start. I started my 22-250AI at 41.0 grains and found pressure at 44.5. Settled on 44.3 running 4,337 fps from a 26" 12 twist barrel. Good luck.

I have had pretty good luck with rl15.5 in a regular 22-250. Was going to give it a test on the AI.