I have a Glock Gen 3 Model 22 which is chambered in .40 cal. I was wondering besides swapping the barrel, are there any other mods I'd have to do in order to convert it to 10mm?
.40 cal to 10mm barrel swap?
- Thread starter Jake_L
- Start date
Help Support Long Range Hunting Forum
entoptics
Well-Known Member
- Joined
- Jan 16, 2018
- Messages
- 846
All you need is a barrel, slide, and frame...
The G22 is too small for 10 mm (grip depth, ejection port, etc), and probably too weakly constructed.
The 10mm Glocks are built on a chunkier frame and slide than the 40/9/357 Sig models.
You can convert to 9mm with a barrel and magazines, or a 357 Sig with just a barrel, but 10mm Auto and 45 ACP are off the table.
The G22 is too small for 10 mm (grip depth, ejection port, etc), and probably too weakly constructed.
The 10mm Glocks are built on a chunkier frame and slide than the 40/9/357 Sig models.
You can convert to 9mm with a barrel and magazines, or a 357 Sig with just a barrel, but 10mm Auto and 45 ACP are off the table.
Thanks for the info
