300 wsm 1000 yrd reloading data

[mike 300 wsm]

Hello I am trying to reload my 300 wsm using 200 grn or 210 grn berger bullets does any one have any load data I could go off of

 

[Frank in the Laurels]

I only know that the powder to use is H-4350... After that it's up to you !

 

[mike 300 wsm]

Any good starting point the data books i have don't go too 210 gr but have heard you could go up too 210 gr i don't know?

 

[Barrelnut]

Here are the start and max loads for 300 WSM with H4350 and 210 Berger VLD from the Berger Loading Manual.

Powder: H4350
Bullet: 210 Berger VLD

Start load: 53.5 Gr. Velocity 2457
Max Load: 59.6 Velocity 2701

 

[kraky]

If I were you I would email berger they send results/data pretty quick.

 

[etisll40]

Any idea which berger in 30 cal can get into the 2900 range, 300 wsm, 26" barrel 1-10.

i'm around 1500 feet here

Thanks

 

[FEENIX]

Here's what I got from Berger team here ...

My current accuracy load for my .300 WSM with 215 is 60 RL-17 with MV of 2750 FPS out 24" barrel using WW brass, 9 1/2M.

Good luck!

 

[etisll40]

thanks

 

[Barrelnut]

Any idea which berger in 30 cal can get into the 2900 range, 300 wsm, 26" barrel 1-10.

i'm around 1500 feet here

Thanks

The 185 and 190 Gr. Bergers should get there easily.

I can get to 3050 fps with H4350 and 180 Accubonds in my 300 WSM with 26" barrel

 

[450hunter]

FEENIX,

What is the COAL of your accurate load if you don't mind. Thanks

 

[haffyti839]

Change ur powder will have to look up info but pushing the 210 in 300 wsm a ove 2900 and a buddy is shooting same in the 3000 no pressure sig s of any and great accuracy

 

[FEENIX]

FEENIX,

What is the COAL of your accurate load if you don't mind. Thanks

No Sir not at all!

My rifle is a Savage 11 FCNS, it can accomodate 3.003" from its DBM but my accuracy load is .080" off the lands.

COAL = 2.967" and CBTO = 2.197", I need COAL of 3.042" and CBTO of 2.277 to touch the lands.

As always, proceed with caution. Good luck!

 

[450hunter]

FEENIX,

Thanks, I was just wondering if they might work in my Tikka mag box. I figured the bullets themselves would be long. Also what twist is your rifle. My Tikka is 1:11.

 

[FEENIX]

FEENIX,

Thanks, I was just wondering if they might work in my Tikka mag box. I figured the bullets themselves would be long. Also what twist is your rifle. My Tikka is 1:11.

1:10".