• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

~270WSM~ 150grn VLD with 7828 and H4831 data needed!

My tube is just short of 28in and I run them around 3200ish . I have mine throated long so I can seat them right out where they should be. I can easily push 140's in the 3400 range with this barrel but I much prefer the 165's at 3050+.
 
H4831sc has been my go to. My rifle likes the lite loads and 150 VLDs approx .015 off the lands (still feeds in mag). 2910 out of my 26 inch Douglas tube with 57 grns. I have loaded to 60 grns at over 3100 fps however groups come apart. I love this powder, very consistent.
 
H4831sc has been my go to. My rifle likes the lite loads and 150 VLDs approx .015 off the lands (still feeds in mag). 2910 out of my 26 inch Douglas tube with 57 grns. I have loaded to 60 grns at over 3100 fps however groups come apart. I love this powder, very consistent.
Ok I'll chrono and give 4831 a whirl!!!!!!
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top