270 Quickload Data Needed

[morgaj1]

Can someone please run Quickload data for 270 Win, 22" barrel, 140gr Nosler Partition, RL26, COAL=3.320", Primer Fed 210 and 215? Thank you.

 

[Muddyboots]

Alliant has data for 150 gr Partition which shoukd give you good start.
Alliant 150 Part

 

[morgaj1]

Alliant has data for 150 gr Partition which shoukd give you good start.
Alliant 150 Part

I saw that, thank you. I was really hoping someone could run the numbers for me to save this precious powder in load development.

 

[just_jon]

Here you go.

 

[just_jon]

Screwed up the cut ands paste. Corrected document attached.

 

[Starlite]

Let us know if this powder gives good groupings. Also if it has good ES/SD. From what I've read it doesn't. I've got other data should you want it.

 

[akh223]

Do you have a fired case capacity in water? It will change results a good bit if your fired case capacity is different from the default in quickload.

 

[morgaj1]

Screwed up the cut ands paste. Corrected document attached.

Thank you!

 

[iclick]

Can someone please run Quickload data for 270 Win, 22" barrel, 140gr Nosler Partition, RL26, COAL=3.320", Primer Fed 210 and 215? Thank you.

What is the case H2O capacity. Can't run a load without that info. 1st thing to put into QL for any load. Also primer data is not listed in QL. That is why you start 10% under max load.

 

[morgaj1]

Do you have a fired case capacity in water? It will change results a good bit if your fired case capacity is different from the default in quickload.

I will measure some.

 

[DFHarley19]

Can someone please run Quickload data for 270 Win, 22" barrel, 140gr Nosler Partition, RL26, COAL=3.320", Primer Fed 210 and 215? Thank you.

You could download the GRT. It is awesome and you could inputs including H2O, COAL, etc, and see the numbers. I have been using them and it works very well. The software is free!

https://www.grtools.de/doku.php