27 Nosler N570 load data

Discussion in 'Reloading' started by rklein, Oct 24, 2018.

  1. rklein

    rklein Active Member

    Messages:
    26
    Joined:
    Dec 8, 2012
    I just got my 27 Nosler back from smith
    would anyone have a starting point for N570 and 170 grain bergers?
    I just necked down 30 Nosler brass.
    I also have retumbo
     
  2. Dmagna

    Dmagna Active Member

    Messages:
    38
    Joined:
    May 30, 2018
    Can you use the 30 nosler case? Usually people knock up the 26 because I think the 30 is so short.
     
  3. Tidus56

    Tidus56 Well-Known Member

    Messages:
    260
    Joined:
    Feb 1, 2018
    Heaven sakes don’t “knock up” the 26 Nosler brass neck it up.
     
  4. Ua26fitter

    Ua26fitter Well-Known Member

    Messages:
    77
    Joined:
    Dec 24, 2016
    no you can not use 30 Nosler brass. it's to short and you are going to screw up bad if you do.
    better look at things and do some research before you just go doing things.
     
  5. Rhovee

    Rhovee Well-Known Member

    Messages:
    358
    Joined:
    Jun 29, 2017
    I agree. I wouldn’t think the 27 Nosler would be based off the 30 Nosler case. The 26 Nosler and 28 Nosler are the same case. Just depends on what neck your reamer has.