30 nosler load data

[MallardAddict]

So they also chamber? I have been buying my barrels from them a couple I have had spiral ground
I then send the barrels over to Altus to be chambered. I guess I need to talk to them to see what all the do. Thanks for the info

May be a little late to the party but Bugholes barrels is also the home of Southern Precision Rifles.

Their reputation is very very good

 

[AverageJoe90]

I think I found the load I'll use for hunting season this year. 215 berger, adg brass, 215m, 84.4 grains h1000, .015 off the lands, 3.690 coal.

 

[Longtine88]

I think I found the load I'll use for hunting season this year. 215 berger, adg brass, 215m, 84.4 grains h1000, .015 off the lands, 3.690 coal.

For sure

 

[southpa]

I think I found the load I'll use for hunting season this year. 215 berger, adg brass, 215m, 84.4 grains h1000, .015 off the lands, 3.690 coal.

That would put a smile on my face! 22" barrel?

 

[AverageJoe90]

That would put a smile on my face! 22" barrel?

26". Hoping it will speed up a little once it's broken in. Those are 18,19, and 20 rounds down the barrel. Honestly, looking back now I wish I would have went with a 22", but if it keeps shooting like this I'm not going to complain lol. I would like to try the 230s at some point too.

 

[southpa]

26". Hoping it will speed up a little once it's broken in. Those are 18,19, and 20 rounds down the barrel. Honestly, looking back now I wish I would have went with a 22", but if it keeps shooting like this I'm not going to complain lol. I would like to try the 230s at some point too.

Ehh don't worry too much. Just enjoy that sweet shooting rifle!!! They make new barrels every day so if you decide you want to go shorter it's not hard.

 

[AverageJoe90]

Ehh don't worry too much. Just enjoy that sweet shooting rifle!!! They make new barrels every day so if you decide you want to go shorter it's not hard.

Appreciate the sound advice!!! I can't wait to stretch it's legs a little bit.

 

[southpa]

Thought I'd update the thread on my findings. Note this is woth virgin brass. I have a hard time just burning consumables without finding g some sort of useful data. So once fire forming is done I'll need to re-tune. At any rate it's what I found.

22" C6 8T
Retumbo
Fed215m
Gunwerks

Ladder done at .010

8

 

[AverageJoe90]

I was able to stretch my load out a little further today. Scope needs some adjusting, but that's 3 shots at 300 yards. Needless to say I'm tickled pink haha