30 nosler load data
- Thread starter Schw15
- Start date
Help Support Long Range Hunting Forum
Contact Berger Tech Support. Also, see similar threads below.
Trm82
Well-Known Member
205 elites in mine. They shoot awesone. I'm using RL26 @3060 fps. Could probably go hotter but there no real reason for it from what I can see.
Liddy
Well-Known Member
215 Berger Hybrids, VV N568, Fed 215GM, ADG Brass @ 3,050fps
Liddy
Liddy
Varmint Hunter
Well-Known Member
180 Accubond - 80.0 RE26 - Fed 215M - 3,170fps - sub .5moa
Liddy
Well-Known Member
I have three 30 Nosler's, all of them were chambered with a .225 freebore reamer. All of them started with ADG virgin brass all three were right at 88gr of VV N568 to get to 3,050fps. Once fired ADG brass they were all different grains to get to 3,050fps. One is @ 88.5, one is @ 88.8 and the third one is @ 89.0. I did not have time do a ladder on any of the three prior to hunting last season but they all had ES in the teens and single digit SD's. All of them shot exceptional groups at 200, 600 and 800 yards. I will fine tune this winter.
Liddy
Buttermilk
Well-Known Member
My 30 Nosler has 0.170" freebore. So far I've only shot two bullets from the gun. A Berger 210 VLDH and a Matrix 210 VLD.
H1000 and RL26 are the two powders I've used so far.
18.5" Bartlein 5R barrel has netted me some pretty good velocity from that short barrel (Remington XP-100) with the faster loss running 2800+ FPS.
H1000 and RL26 are the two powders I've used so far.
18.5" Bartlein 5R barrel has netted me some pretty good velocity from that short barrel (Remington XP-100) with the faster loss running 2800+ FPS.
205 and 220 Berger's. Used Retumbo mostly and H1000. The 220's liked 86 gr of Retumbo.
I will be working with 199 Hammer Hunters when weather permits.
I will be working with 199 Hammer Hunters when weather permits.
24" Nosler Proof 9" twist H1000 87.5 gr 215 Berger @ 2.762" cbto, 0.024" OL es 7 ADG resized brass 0.002" neck tension 3,110' avg producing .2 moa 3 shot and 7 shot .38 moa.
24" Nosler Proof 9" twist H1000 84.0 gr 220 LRHT 2.790" cbto, 0.003" OL es 9 ADG resized brass 0.002" neck tension 3,025' avg producing .1-.2 moa 3 shot groups and 7 shot groups at .3-.4moa.
24" Nosler Proof 9" twist H1000 84.0 gr 220 LRHT 2.790" cbto, 0.003" OL es 9 ADG resized brass 0.002" neck tension 3,025' avg producing .1-.2 moa 3 shot groups and 7 shot groups at .3-.4moa.
Liddy
Well-Known Member
Update us on the 199 hammers to include best powder used
Will do. I started last fall but ran out of time. Was using H1000 and ran a ladder from 85.5gr - 88.5. Velocity was 3003 - 3118 over that range with 20" 9twist. 87 and up were compressed slightly. No heavy lift or ejector marks.
