260 Rem 140 VLD

Stgraves260

Well-Known Member
Joined
Sep 1, 2009
Messages
942
Very pleased w/ my 260 still. Got back from TacPro a 1000 yard shooting range here in Texas. I shoot a Rem Model 700 action, 27" Krieger Barrel, Timney trigger 2 stage 8oz 1st 2.5lbs 2nd. Getting very consistent 3035 FPS w/ Rem brass Federal 210M Primers and 42.5 grns of H4350. This is the same load I used to break my own record in California in the Desert. 4 shot 3.5" group. Just wanted to share the info to whomever shoots a 260 Rem. I have been shooting this gun sense 1997. I have never gun hungry with this gun. Deer, Hog, Elk. Most difficult shot taken was at 997yrds in Cisco Tx. 30 degree angle/ .866 cosine. Clean kill 297lb hog 2.5" cutters. 51.25" chest. The 140grn Berger did not pass through but still did the job. :)
 
I don't believe your velocity, I shoot 140vld 43.5 h 4350 28 in barrel 2795 fps.
 
Make that three of us.

I have 3 260 rem, you can get 3000 with superperform, and I could not get to shoot, I have not tried rl 26 or imr 4955, can get there in a creedmoor with good accuracy.

But on my list to try.. with those powders..
 
Very pleased w/ my 260 still. Got back from TacPro a 1000 yard shooting range here in Texas. I shoot a Rem Model 700 action, 27" Krieger Barrel, Timney trigger 2 stage 8oz 1st 2.5lbs 2nd. Getting very consistent 3035 FPS w/ Rem brass Federal 210M Primers and 42.5 grns of H4350. This is the same load I used to break my own record in California in the Desert. 4 shot 3.5" group. Just wanted to share the info to whomever shoots a 260 Rem. I have been shooting this gun sense 1997. I have never gun hungry with this gun. Deer, Hog, Elk. Most difficult shot taken was at 997yrds in Cisco Tx. 30 degree angle/ .866 cosine. Clean kill 297lb hog 2.5" cutters. 51.25" chest. The 140grn Berger did not pass through but still did the job. :)

Ask wildrose. He's been shooting the peregrine bullets in his 260 and I think he's using rl26 among others
 
Warning! This thread is more than 8 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top