Hoping one of you Gurus can shed some light on me here. I have a 700 short action that im putting a 243. bartlein on. My question is this. Id like to be able to seat the 105 hybrids against the lands but think I'm going to run into some clearance issues trying this and having them fit in a detachable mag. Have any of you done this without having to build on a long action? Looking for any advice I can get and thank you.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
243. Detachable Mag Length Berger
- Thread starter CrowsFoot
- Start date
Help Support Long Range Hunting Forum
sable tireur
Well-Known Member
- Joined
- Oct 8, 2010
- Messages
- 3,949
CrowsFoot,
The longest DBM I use has a clear space of 2.950" without the spacer being used. Generally, I set my OAL to 2.925" to allow a little bit of room for feeding.
I suggest getting the magazine system you want to use, measure the interior of the mags then makes some dummy rounds for your gunsmith to use for the chamber.
Be aware that using the Hybrid in the .243 case will only have 0.162" of the shank in the neck with the OAL of 2.925". This doesn't leave much to chase the lands if you should find that necessary. It's a balancing act that you might consider getting your gunsmith involve in.
Regards.
The longest DBM I use has a clear space of 2.950" without the spacer being used. Generally, I set my OAL to 2.925" to allow a little bit of room for feeding.
I suggest getting the magazine system you want to use, measure the interior of the mags then makes some dummy rounds for your gunsmith to use for the chamber.
Be aware that using the Hybrid in the .243 case will only have 0.162" of the shank in the neck with the OAL of 2.925". This doesn't leave much to chase the lands if you should find that necessary. It's a balancing act that you might consider getting your gunsmith involve in.
Regards.
Thank you for the reply. I've had my worries about the 105's and the length issues trying to make this duo work. Shot the hybrids out of a 6 creed last weekend and was very impressed with them out to a grand. As for the 243. I just have a soft spot for it and wanted to do it on this particular action. I will definitely take your advice during the build.
dsculley
Well-Known Member
The hybrids are not supposed to be particularly sensitive to seating depth. Try the Berger seating depth test. You may find there is no benefit from seating that long which will make life easier.
