Georgiashooter

It’s not the rifle, it’s the chambering jobs.

Had a Winchester 70 in the early 70's. 243 std weight barrel. Shot 1.5 inch groups. Reloading didn't shrink them much. Took it to my...

You’re Welcome! I started this because, it appears that one of the first things mentioned in Accurizing a rifle is to free- float...

I have 2 rifles that are full length neutral barrel bedded and they are both very accurate and consistent. And all my other rifles are...

So you shot one 3 shot 1/2 moa group. Then shot 1.25-1.5@ groups. Could just be the average is 1.25”. If you were to shoot enough rounds...

Based on the fact that you are able to tighten up the groups with different torques on the action screws, I am of the belief that there...

3" at 105 yards points to something loose to me. A non bedded rifle will shoot fine. Not clean would still shoot better than 3 moa. A...

Based on what you've posted, my 1st guess would be that the rifle needs to be properly bedded. While it's at the gunsmith, have the...

I may have missed it, but I didn't see where you mentioned that your twins have grown up shooting...? Assuming they have, you're past...

6.5 cm all the way, cause it seems like you are thinking big. Unless you are getting them suppressors too, no sense in unnecessary...

You have a lot deeper pockets than my old man. Would you consider adopting a 52 year old? I'm house broken already!

Grab you a pure precision stock varmint contour on BF sale. They’re a great stock and very light. ~25 oz

Use a sharpie to make a line from the middle of seater stem to the outer edge. Calculate the travel per turn based on the threads per...

Why? Are you not able to adjust a regular die in 2-5 adjustments to get to a setting? I usually figure out what one seater turn is and...

HS precision is the best if not only close to flush fit mag, to fit a bdl inlet. They are fairly pricey but work great and their mags...