200 grain bullet with Reloader 26?

[WEATHERBY460]

Berger 200.20x in a 300Win Mag...how much powder should I use? Thanks

 

[300 Driver]

I sent Phil at Berger this same question about 300WSM. He said the 200 hybrid data was also good for the 200.20X.

Hope that helped.

 

[WildRose]

It's a really new powder so there's not a whole lot of load data out there yet but the 200gr SMK shows 77.4. You might want to back off a full grain and work up.

Alliant Powder - Reloader's Guide

 

[barefooter56]

Weatherby460,
If you do not have a BERGER RELOADING MANUAL. Please contact us at [email protected] for load data.
Take care,

 

[unclefish]

I use RL26 in my 300wm . 72 grains with a 200gr barnes lrx bullet. but I did switch to the barnes 175LRX with 80gr of RL26 this year and ended up .100 of lands much better dropping elk and mule deer. than the 200LRX. just my 2 cents. didn't try the bergers.

 

[johnnyk]

I'm burning 77gn, using the CCI BR2 and pusing the 208gn A-Max to an average of 3092fps.

I started around 73 and worked up to this. I stopped here because it was the best load overall and I knew I was probably getting close to max.

Hope this helps. JohnnyK.