The Beast 30-06
- Thread starter baldhunter
- Start date
Help Support Long Range Hunting Forum
baldhunter
Well-Known Member
I need to play with R-16 powder some more with the 180gr.I really have been working with the 168gr Ballistic Tips more than anything.The 30-06 is really an amazing cartridge.So many bullet weights and powders work so well and you seem to always end up with a full case of powder.I swear I think I could just fill the case by sight and it would shoot well.
rustyshackleford
Well-Known Member
In mine I got better velocity with H4350 with 180's. With RL-16 I got to about 2750 vs H4350 easily hitting 2820. I only tried it because a buddy of mine was pushing 142 SMK's at 2770 in his needmoor. I had to show him what it would do in a real cartridge
xsn10s
Well-Known Member
- Joined
- Mar 7, 2016
- Messages
- 7,350
What are the COAL of your rounds? TIA.
del2les
Well-Known Member
Good results and glad to see another true '06 velocity fan. For decades, a few of us have long bragged on a properly barreled, throated and loaded '06 for its "near" 300 velocities with more efficiency and very good accuracy. Modern powders and bullets have only added to its versatility and effective range.
jjmp
Well-Known Member
Op,congrats on the Beast 
,minesports a Hart #5.5 conture 1/10 twist SS & is 27.25 inch's long . My alliant data sheet uses federal 210 primers & federal brass for the RL/16 powder .150 nosler blips max at 58.0 for3048 fps ,oal 3.270, 150 Barnes tax max at 57.5 for 3029 fps & 3.260 oal ,165 Sierra game king ,max was 57.2 for 2947 fps ,oal 3.220 Hornady GMX/165 max was 54.5 for 2843 fps oal 3.230 ,Sierra 168 matchking max56.0 for 2905 fps oal 3.230 last 180 nosler partition max was 56.0 for2824 fps oal 3.230 Note all above shot in a 24 inchSAAMI chamber Universal receiver test barrel . So if your barrel is 28 inch's and 25fps per inch of barrel length ,Cheers and enjoy,great posts everyone
,minesports a Hart #5.5 conture 1/10 twist SS & is 27.25 inch's long . My alliant data sheet uses federal 210 primers & federal brass for the RL/16 powder .150 nosler blips max at 58.0 for3048 fps ,oal 3.270, 150 Barnes tax max at 57.5 for 3029 fps & 3.260 oal ,165 Sierra game king ,max was 57.2 for 2947 fps ,oal 3.220 Hornady GMX/165 max was 54.5 for 2843 fps oal 3.230 ,Sierra 168 matchking max56.0 for 2905 fps oal 3.230 last 180 nosler partition max was 56.0 for2824 fps oal 3.230 Note all above shot in a 24 inchSAAMI chamber Universal receiver test barrel . So if your barrel is 28 inch's and 25fps per inch of barrel length ,Cheers and enjoy,great posts everyoneStammster
Well-Known Member
My 24" Kimber pushes 180 Partitions at 2960 fps with a full case of RL26.
baldhunter
Well-Known Member
jjmp
Well-Known Member
SWEET,roc ON 
xsn10s
Well-Known Member
- Joined
- Mar 7, 2016
- Messages
- 7,350
Was the 200 AB about the same length? My Mauser magbox is about 3.400" long so I wanted to see if it'll fit. You may see me with a 26-28" barrel too!
baldhunter
Well-Known Member
Yes the 200 AB is set at the same length.My rifle barrel is not long throated and I like that.I think it's much easier to load for.I'm running my bullets .025 - .030 off the lands at that length.
imyourhuckleberry
Well-Known Member
You are shooting my favorite and only hunting caliber. For the life of me I do not understand why manufacturers do not offer the 30-06 with 26" barrels to start with. Using 22" barrels robs the cartridge at a minimum of 200 fps, with your barrel at 28" which I consider an excellent choice really ups the caliber's potential to its maximum capabilities.
I had my Kimber 84L Hunter in .30-06 rechambered to .30 Gibbs (https://www.longrangehunting.com/threads/30-gibbs-is-finally-ready.242088/page-11) and currently propelling the 190 VLD at AVG = 2806, ES = 15, SD = 6 with using RL17 with plenty of powder room left. I have RL26 but have only been playing with powders already opened. I cannot seem to find time for load development.
That 30 Gibbs is an under rated cartridge, magnum potential in a belt less case!
