30-06 compressed loads
- Thread starter bstomper
- Start date
Help Support Long Range Hunting Forum
memtb
Well-Known Member
If and I do mean "if", you are not experiencing pressure signs, use a drop tube and vibrate or tap the case to settle the powder. One of my previous loads with my AI, using a powder a bit too slow filled the case just short of the rim.....not the neck! I then seated, very slowly and carefully a 270 grain Barnes ( long, copper bullet). If seated fast.....it would bulge the case! I'll readily confess that this is a bit extreme. Getting an additional 2 to 4 grains of powder into the case, should be very doable!
Pretty much, every rifle load I have is somewhat compressed. Again, if all indicators show you are within safe pressures.....continue to work up "slowly"! memtb
Pretty much, every rifle load I have is somewhat compressed. Again, if all indicators show you are within safe pressures.....continue to work up "slowly"! memtb
MTtimberline
Well-Known Member
When I was starting to reload, I had only one hunting rifle for everything including target shooing at the range. It was just a Remington 700 .30-06 ADL. That was when we all thought the fastest was the best. I was shooting 150 grain Corelokt and Nosler BT charged with 62.0C of H4350. This was the max load in the Hodgdon load data for the NOS BT. It was a very fast and accurate load but also had signs of pressure. I had since then added other rifles for different needs and settled on a 165 grain load for that rifle.
bstomper
Well-Known Member
Yep. No possible way I'm ever getting 62 gns it the case LOL
bstomper
Well-Known Member
If it comes to that I will be trying another powder. I will work up slowly to where I start getting compressed loads or pressure and if I'm not happy with the results I will switch powders. Like I mentioned before I'm just trying to use what I have on hand. Thanks for all the info guys. I just keep learning every time I post here.
MagnumManiac
Well-Known Member
- Joined
- Feb 25, 2008
- Messages
- 5,588
A compressed load is nothing to fear.
If you use a funnel and swirl the charge into the case, there will be a significant difference to the powder height. This helps a lot with compressed loads allowing them to fit.
Most 150gr bullets are short, seat to mag length and test.
The only time a heavily compressed load is dangerous is IF the bullet backs out over time.
This needs to be checked the next day, if the bullets back out, then you need to re-assess.
Cheers.
If you use a funnel and swirl the charge into the case, there will be a significant difference to the powder height. This helps a lot with compressed loads allowing them to fit.
Most 150gr bullets are short, seat to mag length and test.
The only time a heavily compressed load is dangerous is IF the bullet backs out over time.
This needs to be checked the next day, if the bullets back out, then you need to re-assess.
Cheers.
DUSTY NOGGIN
Well-Known Member
if you call ydanroH to ask em why .. they will probably ask what press you are using and blame it on you because its not red .. there is so much data in that book that is useless, i never rely on that book unless ive looked at 2 or 3 other data sources
when you talk to their tech support . just know, it is really just a professional liabilty deflector
I have several loads in different calibers that are compressed. As much as 110% of case capacity. Some people go even more. Main point is, approach slowly and watch for pressure. You will find compressed loads in many manuals. Safety first!
baldhunter
Well-Known Member
Remington brass has less volume than Winchester brass.I know I can get 60.0grs of IMR 4350 powder in a Winchester case because I've loaded that before with 150gr Ballistic Tips,so I think I can get over 61.0grs of H 4350 since H4350 is heavier per volume and I usually load at least one grain more.I'll have to check tomorrow since I have all three of the 4350's.Accurate 4350 is the lightest powder per volume,so it fills the case the most with the same charge weight.IMR 4350 is the mid weight and H 4350 is the heaviest of the three taking up the least space in the case at the same weight charge.
D
Deleted member 115654
Guest
There are better powders for a 150 than 4350. 4064 and W760 come to mind.
baldhunter
Well-Known Member
Hodgdon's load data is showing 62.0grs of H 4350 with a 150gr Ballistic Tip.
www.hodgdonreloading.com
Take Aim at Rifle Reloading Data | Hodgdon Reloading
Find what you need in four easy steps. Select your cartridge type from the drop-down list. Then select your bullet weight, powder manufacturer and powder type. If you're unsure, or just want options, check as many boxes as you'd like. Click "Get Data" to view results.
Hespco
Well-Known Member
For bullets of 150 gr try Win 760/H-414. Same powder , different label. A ball powder that will give great velocity with the 150. Has never let me down. Give it a try . I believe you will love it.
D
Deleted member 115654
Guest
It will work fine. Don't forget the magnum primer.
